YTX5L-BS high performance motorcycle battery Motorcycle Lead acid
>How to maintain the battery
1. Check the liquid level regularly, if the liquid level is below
the horizontal line. Please fill up to the upper level with
distilled water or purified
water in time. Never add sulfuric acid to dissolve waves. After
adding liquid, the locomotive should be run for a period of time to
electrolyte mixed evenly:
2. If the battery has no electrolyte. Or the battery is short of
about half of the electrolyte or overcharged, the life of this
battery is basically
terminated, even if it can be used after adding the electrolyte,
the time will not be too long. . If the battery is in use, there is
no battery solution.
It means that if the charging current is too large, the capacity
and life of this kind of dried electro-hydraulic battery will be
sharply reduced, and
it will even fail directly. .If the battery power is insufficient,
please remove the battery to recharge it in time. If the battery is
not charged in time,
used for a long time without full charge, etc., it will cause the
battery to vulcanize, reduce the battery capacity and shorten the
life, and even
the battery cannot be used.
3. It should be noted that the battery has been in the state of
power for a long time,-part of the active material lead dioxide
(pbo2) will always
become dense lead sulfate (pbso4) and cannot be reduced to lead
dioxide (pbo2), resulting in a decrease in capacity and a shortened
the battery is not charged for a long time after being discharged,
the lead dioxide (pbo2) will become dense lead sulfate (pbso4) and
no longer be reduced to lead dioxide (pbo2). This will lead to the
end of battery life.
|Battery Model No.||12V 3ah|
|Operating temperature range||-20℃-50℃(-4℉-122℉)|
|Standard charging method(25℃)||Current||0.9A|
|Quickly charging method(25℃)||Current||4.5A|
>Structure and composition
|Component||Pos. plate||Neg. plate||Container||Cover||Separator||Electrolyte||Safety valve||Terminal|
|Raw material||lead dioxide||lead||ABS||ABS||AGM||Sulfuric acid||Rubber||Copper|
>Delivery & Payment Terms
|EXW||30% in advance for deposit payment, the balance payments will be
paid before shipment.|
|CFR/C&F||30% in advance for deposit payment, the balance will be paid
against copy of B/L|
|L/C||For the amount of one shipment above 50,000 usd, L/C at sight is
For the amount less than 5000 usd
|Delivery Time||7~25 days after receiving the payment or the deposit payment|
Samples and OEM, Warranty and After-Sale Service:
Sample can be provided for quality testing
After-Sale Service: 24 Hour-Hot Line for Consultacncy and Technical
✓ Support OEM
✓ Raw material 99.99% pure lead
✓ Comply with international standards, such as GB | JIS | DIN |
✓ Green and recyclable, environmental certification
✓ Strict quality management
✓ More than 20 years of production experience
Q1. Are you manufacture or trading company?
A: We are manufacture in battery line since 1995, which start from
plate. Now more than 99.9% spare parts are made by ourself.
Q2. What is your terms of payment?
A:T/T 30% as deposit, and 70% before delivery.
We'll show you the photos of the products and packages before you
pay the balance.
Q3. How can I get the price?
A:Please tell us the products and quantity you interested in, then
we will send you the quotation asap.
Q4. Can you print picture on battery?
A:Yes, OEM accept. Different print is ok.
Q5. How long is your delivery time?
A: Usually there’re stock for common models. And itwill be about
25-30 days when without stock.
Q6. What is the minimum order quantity?
A:our brand MOQ is 300 pcs/each model, better over 1000 pcs/model